| Color: | |
|---|---|
| Quantity: | |
YX35-125-750
TOPROPAN
Product Description
The YX35 - 125 - 750 profiled metal panel is a widely - used material in the construction field. It is mechanically pressed from PPGI (Pre - painted Galvanized Iron), PPGL (Pre - painted Galvanized Steel), aluminum plates or stainless - steel plates.
The wave - crest height is 35 mm. A relatively high wave - crest can provide better load - bearing capacity in construction applications. For example, when encountering snow disasters or facing wind loads when applied to walls, the 35 - mm wave - crest can effectively disperse the pressure, making the plate less likely to deform and thus ensuring the stability of the building structure.
The wave - crest spacing is set at 125 mm. A reasonable wave - crest spacing helps optimize the structural strength of the plate. When subjected to external forces, this spacing enables the stress to be evenly transferred between the wave - crests and troughs, enhancing the overall anti - deformation ability of the plate and making the structure more compact and stable.
The effective width of this profiled metal plate is 750 mm. During the laying process, the number of splices between plates can be reduced. Fewer splices can not only improve construction efficiency but also reduce potential risks brought by splicing, such as reducing the probability of problems like water seepage and unevenness.
Generally speaking, the thickness of the YX35 - 125 - 750 profiled metal plate ranges from 0.3 mm to 0.8 mm. The thickness of the plate is selected according to specific usage scenarios and requirements. Thinner plates are suitable for building parts with relatively low load - bearing requirements, while thicker plates can be used in areas that need to bear larger loads or face relatively harsh environmental conditions, such as key stress - bearing parts of industrial plants.
We will offer reasonable suggestions according to your building and environment.
Product Advantage
Structural Stability: With a wave - crest height of 35mm and a wave - crest spacing of 125mm, the structure is compact. It can effectively disperse pressure and evenly transfer stress, and has strong anti - deformation ability. In buildings in coastal areas, there are often typhoon - weather. Relying on its structure, the YX35 - 125 - 750 profiled metal plate can evenly disperse the wind force, prevent the wall from deforming due to excessive wind force, and ensure the safety of equipment and personnel in the factory building.
Convenient Construction:It is a single - layer metal plate formed by mechanical pressing, which is lightweight. With an effective width of 750mm, it reduces the number of splicing during laying. For example, in the construction of the walls and roofs of large - scale warehouses, using this type of metal plate enables rapid laying. Compared with narrow plates, it greatly reduces the splicing process, saves manpower and time costs, and enables the warehouse to be put into use more quickly.
Diversity in Appearance and Thickness: The thickness ranges from 0.3mm to 0.8mm and can be selected according to requirements. Thinner ones are suitable for parts with low load - bearing requirements, while thicker ones are used for high - load or harsh environments. For the decorative partition walls (non - load - bearing) in ordinary residences, 0.3mm - thick plates can be selected; while in chemical plants, which need to bear equipment vibration, corrosive gases, etc., 0.8mm - thick plates can meet the requirements. At the same time, there are various colors to choose from.
Technical Parameters
Nominal Thickness | 0.3mm-0.8mm |
| Useful Width | 750mm |
| Surface Material | PPGI/PPGL/Stainless Steel/Aluminum Plat |
| Surface Coatin | PE/SMP/HDP/PVDF |
| Fire Resistance Performance | A |
